New Hampshire Electrical Rebates and Incentives Worth Knowing

If you are adding a heat pump, a heat pump water heater, an EV charger, or upgrading your service in New Hampshire, there are real rebates and incentives worth checking before you start. The main statewide program is NHSaves, run together by the state's utilities, and there are state electrification rebates and federal tax credits layered on top. The one honest caveat is that amounts, deadlines, and eligibility change, sometimes significantly, so the right move is always to confirm the current offer on the program's own page before you count on it. We build the electrical work to code and to qualify where it can, and give you a free, honest estimate for the actual job. We are not a rebate-processing service, but we will point you at the right pages and wire the project so it supports the incentive rather than working against it.

What is NHSaves, and who runs it?

NHSaves is New Hampshire's statewide energy-efficiency program, delivered by the state's electric and gas utilities together: Eversource, Liberty Utilities, Unitil, and the New Hampshire Electric Cooperative. You get the same core programs and rebates regardless of which of those serves your home, and Eversource covers the large majority of the state, including most of Rockingham County around Atkinson, Salem, and Derry. NHSaves is where most homeowners find rebates for high-efficiency equipment such as air-source heat pumps, heat pump water heaters, and qualifying smart thermostats. Their website lists the current offers, the efficiency requirements the equipment has to meet, and the rebate forms, and that page is the source of truth for the amount, because the numbers are updated regularly.

What rebates are available for a New Hampshire home?

The common ones cluster around electrification and efficiency. Through NHSaves, New Hampshire homeowners can find rebates for air-source heat pumps, both ducted and ductless, heat pump water heaters, and Wi-Fi thermostats installed with a qualifying heat pump. As a sense of scale, recent NHSaves heat pump rebates have been offered on a per-ton basis with enhanced amounts for households replacing electric resistance heat, and the heat pump water heater rebate has been a flat several-hundred-dollar figure. Those numbers move, so rather than promise you a specific dollar amount that may be stale by the time you read this, check the current figure on the NHSaves page for your equipment and your utility. What does not change is that these measures usually need electrical work behind them, and that is where a licensed electrician comes in.

Are there rebates for an electrical panel or service upgrade?

This is the part worth a real conversation, because it is often the hidden cost of going electric. Many electrification measures, a heat pump, a heat pump water heater, or an EV charger, can push an older 100-amp or 150-amp service to its limit and require a panel or service upgrade first. New Hampshire has a program aimed squarely at that: the New Hampshire Department of Energy administers a Home Electrification and Appliance Rebates program, funded through federal dollars and targeted at income-eligible households, and it can help cover the electrical upgrades that make new electric equipment possible, not just the equipment itself. Eligibility, income limits, and covered items are all set by the state program and they do change, so confirm the current terms on the New Hampshire Department of Energy page. If a panel upgrade is part of your project, ask about it, because it can be the difference-maker on cost.

What happened to the federal tax credits for panels and EV chargers?

This is the honest, up-to-date picture, and it changed recently. For several years the federal energy-efficient home improvement credit, known as 25C, let homeowners claim a portion of the cost of qualifying improvements, and an electrical panel upgrade could qualify when it was done to enable other qualifying equipment like a heat pump. Separately, an alternative-fuel refueling credit, 30C, applied to home EV chargers in eligible areas. Recent federal law moved up the end dates for both of these credits, so the panel and equipment credit applied to qualifying work placed in service through the end of 2025, and the EV charger credit through the middle of 2026. Because these dates and the eligibility rules shift with federal legislation, do not assume a credit is still available. Confirm the current status with ENERGY STAR, the IRS, and your own tax preparer before you count a credit into your budget, and keep every receipt and equipment certificate if you do qualify.

What if my home is in Massachusetts instead?

Then a different, and often larger, program applies, and Lembo Electric is licensed to do the work there too. Massachusetts runs Mass Save, delivered by a collaborative that includes Eversource, National Grid, Unitil, Liberty, Berkshire Gas, and Cape Light Compact. Mass Save has offered some of the strongest residential heat pump incentives in the region, along with the 0% Mass Save HEAT Loan for qualifying efficiency upgrades. If your home is in Haverhill, Methuen, Lawrence, Andover, or elsewhere in the Merrimack Valley, that is the program to look at, and the equipment has to meet the current Mass Save standards, which have tightened toward cold-climate certified systems. As always, the amounts and the qualified-equipment list are set by the program and change, so check the Mass Save site for the current offer. We do the electrical side to Massachusetts code, 527 CMR 12, so the install supports the incentive.

Is it worth timing the electrical work around a rebate?

Sometimes yes, and sometimes the timing takes care of itself, so it is worth thinking about before you start rather than after. If you are already planning a heat pump or an EV charger and the panel needs an upgrade to support it, bundling the electrical work into that project is usually the tidy and cost-effective way to do it, and it can help the whole job line up with a program's requirements. On the other hand, chasing a rebate deadline is only smart when the underlying work genuinely makes sense for your home. A program end date is a reason to stop delaying a project you already need, not a reason to buy equipment you do not. The honest read is that the incentive should make a good decision cheaper, never turn a bad decision into a purchase. We will tell you plainly when it is worth moving now and when there is no rush, because a job done to fit a deadline instead of your home is not the kind of work we want our name on.

Do I have to buy a specific brand to get a rebate?

Usually you need equipment that meets the program's efficiency standard, not a specific brand. NHSaves, Mass Save, and the federal programs generally set a minimum efficiency the equipment has to hit, often ENERGY STAR or a cold-climate certification, and any qualifying unit counts. That is good news, because it means you can choose the right equipment for your home and still qualify, rather than being boxed into one manufacturer. We can steer the electrical side, the dedicated circuit, the panel capacity, the disconnect, so the install supports a qualifying setup instead of quietly disqualifying it on a technicality.

How do the rebates actually get claimed?

It varies by program, which is exactly why the program page matters. Most NHSaves and Mass Save rebates are claimed by the homeowner or the installing contractor through a rebate form after the work is done, with a deadline to submit and an efficiency certificate to attach. Some incentives are applied instantly at the distributor or contractor level so you never see the full price. The state electrification programs and any federal tax credits have their own separate application steps and eligibility checks, filed differently again. The cleanest approach is to confirm the process on the program page before the work starts, so nothing is lost to a missed deadline or a missing certificate after you have already paid.

How does Lembo Electric fit into all of this?

We handle the electrical work these upgrades depend on: the dedicated circuits, the service and panel upgrades, and the wiring for a heat pump, a heat pump water heater, or an EV charger, and we do it to the code of your state so it holds up to inspection and to a rebate program's requirements. We will not promise you a rebate number a program controls, and we will not fabricate a figure, but we will point you at the right program pages and build the job so it qualifies where it can. Homeowners in Atkinson, Derry, and Windham have started right here, with a free estimate and a straight answer. Ask about the incentives when we come out.